The Hose and Faucet Freeze Checklist
It’s not winter yet, but winter is coming. There’s no clearer sign of it than how quickly the nights are cooling down. Here in Utah and Idaho, frost and freezing can start to happen before winter actually begins, so now is the time to start protecting your home from the coming cold. There’s no better place to start than with your hoses and outdoor faucets.
Remove the Hoses
You might be wondering why you have to unplug your hoses if you turned off the water. After all, how can it freeze if there’s no water running to it? Just turning off the faucets is no guarantee. Even if your faucets are not putting out water, that doesn’t mean there’s no water in the hoses. While the water may have stopped spraying, there’s still water inside the hose. Your best efforts to get it all out won’t get everything. During the summer, excess water will evaporate in the heat. In the fall, it never gets warm enough for that. By the time the first frosts roll around, there’ll be plenty of water leftover in the hose; enough to burst your hoses if you leave them out. This may even potentially damage the faucets they’re attached to.
Inspect The Faucets
Once you’ve removed the hoses, inspect the faucets. Check all the faucets for leaks and drips. Even a small leak is enough to freeze. If the water freezes, the expansion could damage the faucet or the pipes connected to it. This will lead to worse leaks and possible flooding in the spring. Worse, if it freezes during the winter, it can become impossible to do anything about it until spring. So, if you do find any leaks while inspecting your faucets, correct them before the winter hits.
Here’ we’re talking specifically about the outside faucets. If you’d like to learn more about how to winterize your pipes to prevent them from freezing, we have another article you can check out.
Storing Your Hose
Once you’ve inspected the faucets, it’s time to store your hoses away for the winter. It’s easier to do while it’s still a little warm, so don’t delay. First, do your best to drain your hose. Elevate it at one end so the water runs down, then slowly walk along the length of the hose, elevating each position as you pass. When you get to the other end, keep it elevated until the water stops dripping out. Afterward, coil it up, making sure there are no kinks. The coil should be about three feet in diameter. Be sure to connect the end fittings to keep insects from crawling into it and plugging it up. Once this is done, store the hose in a warm location off the floor. A hose hanger or shelf in the garage is usually the best bet.
Enjoy the Winter
Despite the cold, there’s a lot to enjoy about the winter and we hope you do. While we can help with the potential flood problems if you need it, it would be far better if it never came up. Be sure to take care of these before it gets too cold. And if you need anything else from us, be sure to get in touch.